Sprinter 144 Full Build Bundle
by The Vansmith DIY
Free local pickup at Vansmith Shop
Usually ships in 4-6 weeks
What's in this bundle
Description: Everything that turns the empty cargo area of a Sprinter 144 into a camper interior, CNC cut in Boulder, Colorado by the team that builds our turnkey vans. You get the walls, floor and ceiling, a sliding Versabed with a mattress cut to fit it, a full-length upper cabinet, a three-unit kitchen galley with running water, and a 40" bench seat. Pick one laminate for all the cabinets, then choose your wall and ceiling finish. One order, one delivery, free shipping to the lower 48.
Who This Is For: DIY builders with a Mercedes Sprinter 144 who want a finished, factory-fit interior without paying for a full custom build, and who are happy to supply their own electrical system and appliances. If you would rather skip the build, we also convert Sprinters start to finish.
What's Included:
- Wall panels: 12 panels cut to follow the factory wall contours, with screws and finish washers, in the finish you choose
- Floor: 3 interlocking 1/2" HexPly panels with a grippy off-black surface, plus 10 cartridges of Sikaflex adhesive
- Ceiling panels: 3 panels with mounting brackets and hardware, in the finish you choose
- Versabed (Hex-Ply): a sliding bed platform, 66.5" wide, that extends from 59.5" to 74.5" long and mounts to the factory wall structure
- Custom mattress, made to order to fit the Versabed stowed or extended
- Full-length upper cabinet: 114" wide with an LED light track and soft-close BLUM hinges
- Three-unit kitchen galley: 60" wide, with a sink section, 3 soft-close drawers, a fridge bay and a Formica countertop
- Sink kit: Ruvati sink, Kraus faucet, 12V pump with switch, and 5-gallon fresh and gray water tanks with all plumbing
- 40" bench seat with a latched lift-up lid and storage underneath
Cabinets ship as sanded kits: CNC cut parts with sanded, broken edges, plus all hinges, drawer glides, latches and screws, ready for you to assemble and install.
What You Still Need:
- An electrical system: battery, charging and 12V wiring. The cabinet lights and the sink pump are included but need wiring to your power.
- Insulation and sound deadening, installed before the panels
- A refrigerator for the galley's fridge bay (see the galley page for the model it fits), and a cooktop if you want one
- Heater, roof fan, windows and any seating or table hardware
- Our Mounting Kit for the upper cabinet (recommended), and trim for the exposed floor edges
Tools You'll Need: Power drill with 1/8", 9/64", step and countersink bits; #1 square and #2 Phillips driver bits; plusnut tool and rivet nail tool; 7/16" socket wrench; clamps and wood glue; wire stripper, plumber's tape and waterproof sealant; and some weights (spare tires work) to hold the floor down while the adhesive sets.
About the Photos: The photos show a Vansmith turnkey Sprinter 144 with a similar layout. That van includes upgrades that are not in this kit, such as the cedar ceiling, bamboo countertop, roof air conditioner, roof fan, electrical system and refrigerator.
Disclaimer: This is a DIY kit and requires assembly and installation. The Vansmith is not responsible for damage caused by improper installation. All DIY kits are made to order and are final sale. Materials and CNC cut quality carry a 1-year warranty. Questions before you order? Email DIY@thevansmith.com.
Frequently asked questions about Vansmith DIY parts
Each Vansmith DIY part is designed for a specific chassis and wheelbase, typically Mercedes Sprinter 144 or 170, Ford Transit 148 standard or extended, or both. The product title and description list the exact fit. If you are unsure, message us with your year, make, model, and wheelbase and we will confirm.
Most Vansmith DIY parts are designed for confident weekend builders with basic tools (drill, level, measuring tape, painters tape). Each kit ships with detailed install instructions. We also offer paid phone and video support if you get stuck, and the kits are built to forgive minor measurement errors.
Each DIY kit is made to order and usually ships in 2 to 4 weeks. Larger multi-product bundles take 4 to 6 weeks. Shipping is free to the lower 48 states — larger items via freight, smaller items via UPS or FedEx. Local pickup at our Boulder shop is available; we will email you as soon as your order is ready.
DIY products are non-refundable because each kit is CNC-cut to spec and cannot be resold. If your order arrives with damaged or missing parts, we will ship replacements at no cost. Every DIY part carries a 1-year material warranty covering defects such as delamination, warping from manufacturing, and incorrect cuts. You have 14 days after delivery to inspect and report any issues. Contact DIY@thevansmith.com for warranty claims.
Yes. If you would rather have a pro install your DIY part, we offer paid install slots in our Boulder shop. Most single-part installs (a galley, bed, or cabinet set) take 1 to 3 days. Contact us for current install scheduling and pricing.
Ready to build your van?
Browse our full collection of DIY van conversion kits or schedule a consultation with our team.
Shop All DIY Kits
